RGS-9244GP Series User Manual
ORing Industrial Networking Corp.
117
below applies.
Enabled
Check to enable the RADIUS accounting server
IP Address
The IP address or hostname of the RADIUS accounting server. IP
address is expressed in dotted decimal notation.
Port
The UDP port to use on the RADIUS accounting server. If the port is
set to
0
(zero), the default port (1813) is used on the RADIUS
accounting server.
Secret
The secret - up to 29 characters long - shared between the RADIUS
accounting server and the switch stack.
Authentication and Accounting Server Status Overview
This page provides an overview of the status of the RADIUS servers configurable on the
authentication configuration page.
Label
Description
#
The RADIUS server number. Click to navigate to detailed statistics of
the server
IP Address
The IP address and UDP port number (in <IP Address>:<UDP Port>
notation) of the server
Status
The current status of the server. This field has one of the following
values:
Disabled
: the server is disabled.
Not Ready
: the server is enabled, but IP communication is not yet up
and running.
Ready
: the server is enabled, IP communications are built, and the
RADIUS module is ready to accept access attempts.
Dead
(X seconds left): access attempts are made to this server, but it
does not reply within the configured timeout. The server has
