ORiNG RGS-9244GP User Manual Download Page 36

Page: 36 / 171

RGS-9244GP Series User Manual

ORing Industrial Networking Corp.

Label

Description

Client

The management client for which the configuration below applies.

Authentication

Method

Authentication Method can be set to one of the following values:

None

: authentication is disabled and login is not possible.

Local

: local user database on the switch is used for authentication.

Radius

: a remote RADIUS server is used for authentication.

Fallback

Check to enable fallback to local authentication.

If none of the configured authentication servers are active, the local user

database is used for authentication.

This is only possible if

Authentication Method

is set to a value other

than

none

local

Save

Click to save changes

Reset

Click to undo any changes made locally and revert to previously saved

values

5.1.4 IP Settings

You can configure IP information of the switch in this page.

Label

Description

Summary of Contents for RGS-9244GP












































































































































































Search results

Summary of Contents for RGS-9244GP

Reviews:

Related manuals for RGS-9244GP

Brands by name

Popular brands

ORiNG RGS-9244GP, User Manual

Search results

Summary of Contents for RGS-9244GP

Reviews:

Related manuals for RGS-9244GP

Brands by name

Popular brands