ORiNG RGS-9244GP User Manual Download Page 68

Page: 68 / 171

RGS-9244GP Series User Manual

ORing Industrial Networking Corp.

VLAN ID Settings

When setting the management VLAN, only the same VLAN ID port can be used to control the

switch.

9000 series VLAN Settings:

5.4.3 Private VLAN

The private VLAN membership configuration for the switch can be monitored and modified here.

Private VLANs can be added or deleted here. Port members of each private VLAN can be

added or removed here. Private VLANs are based on the source port mask, and there are no

connections to VLANs. This means that VLAN IDs and private VLAN IDs can be identical.

A port must be a member of both a VLAN and a private VLAN to be able to forward packets.

By default, all ports are VLAN unaware and members of VLAN 1 and private VLAN 1.

A VLAN-unaware port can only be a member of one VLAN, but it can be a member of multiple

private VLANs.

Summary of Contents for RGS-9244GP












































































































































































Search results

Summary of Contents for RGS-9244GP

Reviews:

Related manuals for RGS-9244GP

Brands by name

Popular brands

ORiNG RGS-9244GP, User Manual

Search results

Summary of Contents for RGS-9244GP

Reviews:

Related manuals for RGS-9244GP

Brands by name

Popular brands