Accessories
57
16-2
Driver
cable
This cable is a shielded cable for good noise immunity in order to connect the I/O signals of the controller to the
driver. The ground wires useful to grounding are provided at both ends of the cable. A connector is assembled at the
driver side.
Model
Length [m (ft.)]
Number of poles
Type
CC24D005C-1
0.5 (1.6)
24
Single-row
CC24D010C-1
1 (3.3)
CC24D020C-1
2 (6.6)
16-3
RS-485 communication cable
This cable is necessary when connecting two or more drivers of the built-in controller type or the pulse input type
with RS-485 communication interface.
It can connect between drivers by connecting to the CN6 and CN7 connectors. Also, it can be used when connecting
the driver and the network converter.
Model:
CC002-RS4
[0.25 m (0.8 ft.)]
16-4
Wiring support tool
Pulse signal converter for noise immunity
It eliminates the noise of the pulse signal and changes the pulse signal to the line driver type.
Model:
VCS06
CR circuit for surge suppression
This product is eff ective to suppress the serge which occurs in a relay contact part. Use it to protect the contacts of
the relay or switch.
Model:
EPCR1201-2
CR circuit module
This product is eff ective to suppress the surge which occurs in a relay contact part. Use this product to protect the
contacts of the relay or switch.
4 pieces of CR circuit for surge suppression are mounted on the compact circuit, and this product can be installed to
the DIN rail. This product can make the wiring easily and securely since it also supports terminal block connection.
Model:
VCS02
Regeneration unit
Connect the regeneration unit if gravitational operation or other operations involving up/down movement, or sudden
starting/stopping of a large inertial load, will be repeated frequently.
Always connect the regeneration unit if an overvoltage protection warning or alarm generates.
Model:
RGB100