4. Connection and Operation
4. 1
Connection
・
Connect the motor according to the “wiring diagram” shown below.
・
Insulate all the wire connections, such as the connection between the motor and the capacitor connection.
Capacitor caps are available as an option to insulate capacitor connection.
■
Wiring diagram
The motor rotates in a clockwise (CW) and counterclockwise (CCW) direction (viewing the motor from the side with the output shaft).
SW1 emits sparks when turned on and off. In order to protect the relay contacts,
CR circuit
（
）
must be connected.
Ro = 5
〜
200
Ω
Co = 0.1
〜
0.2
μ
F 200WV
Option of the ORIENTAL MOTOR’s surge absorber is available.
Optional product name
EPCR1201-2
（
sold separately
）
Note: In case of 60W and 90W type, When removing the sheath of the cable, be careful not to damage the inside lead wire.
4
No. of
Switch
SW1
SW2
Specification
Single-phase
100V
AC125V
3A
or more
Single-phase
200V
AC250V
1.5A
or more
Three-phase
200V
AC250V 1.5A
or more
−
[6W〜25W type]
[40W〜 90W type]
Note
Switched Simultaneously
−
No. of
Switch
SW1
SW2
Specification
Single-phase
100V
AC125V
5A
or more
Single-phase
200V
AC250V
5A
or more
Three-phase
200V
AC250V 5A
or more
−
Note
Switched Simultaneously
−
CCW
CW
SW1
ON
Ro
Co
Ro
Co
ON
SW2 CCW
CW
Gray
White
Line
Black
Yellow
Yellow
Capacitor
Magnetic
Brake
Motor
CW
Gray
White
R
S
T
(U)
(V)
(W)
SW1
Ro
Co
Ro
Co
Ro
Co
Yellow
Yellow
Black
Magnetic
Brake
Motor
Line
CCW
CW
SW1
ON
Ro
Co
Ro
Co
ON
SW2 CCW
CW
Yellow
White
Line
Black
Orange
Orange
Capacitor
Magnetic
Brake
Motor
CW
White
R
S
T
(U)
(V)
(W)
SW1
Ro
Co
Ro
Co
Ro
Co
Yellow
Orange
Black
Magnetic
Brake
Motor
Line
Orange
6W〜40W
60W, 90W
Single- phase Motor
Three- phase Motor
Motor type
Out put power
