![background image](http://html1.mh-extra.com/html/oricom/secure875/secure875_user-manual_1650596006.webp)
4
GETTING STArTEd
3 Functional Description
Powering your monitor
Fully charge the monitor before use. After initial charge,
recharge as required.
DC IN 5V
DC
IN 5
V
Warning: Only use the AC power adaptor supplied with
the product as other power adaptors could damage the
product. This product is designed for indoor use only.
Parent Unit
You can use the device while charging.
Camera Unit
The camera unit must be plugged in at all times in order to
operate.
■
Confirm the parent unit power LED is on.
Important:
The parent unit is powered by a rechargeable Lithium
Battery Pack. The red power LED lights up on the parent
unit when it is charging, to indicate power is being supplied
to the unit. In the case of a low battery the red power LED
will flash. The parent unit battery should be recharged.
Battery Life
The rechargeable battery pack (supplied) can be charged
and discharged hundreds of times, however it will
eventually wear out and lose its ability to hold a full charge.
When the in use time becomes noticeably shorter than
normal, it is time to purchase a new battery pack.
How to purchase spare parts
You can purchase batteries and extra camera units from
Oricom www.oricom.com.au
Operating your baby monitor
The basic operation is as follows:
Pairing
The units already come paired for your
convenience. This button on the base of the
camera is used to put the camera into pair
mode. You can select the camera number
when pairing. Up to 4 Cameras may be paired.
1. Power on parent unit and camera unit.
The power LED for the parent unit should be ON.
2. Touch the live view screen on the parent unit, this will
activate the settings, volume, pan tilt and lullabies icons.
3. Press the [ ] button on the monitor.
4. Select [
] icon.
Summary of Contents for Secure875
Page 19: ......