![background image](http://html1.mh-extra.com/html/oricom/secure875/secure875_user-manual_1650596015.webp)
13
TrOuBLEShOOTING
9 Troubleshooting
Problem
Solution
No picture from
camera
1. Check all connections to the camera.
Make sure the adaptor is plugged in.
2. Make sure that the cameras and
monitor are both ON.
3. Make sure that the camera is in
range of the parent unit.
4. Make sure the camera and parent
unit are paired.
5. Adjust the parent unit antenna to
vertical position.
The picture is
or has become
choppy
The picture may become choppy when
experiencing a lower frame rate (i.e.
10 frames per second vs. a higher 20
frames per second).
1. Try moving the camera closer to the
parent unit.
2. Remove obstructions between the
parent unit and camera.
3. Adjust the parent unit antenna to
vertical position.
No sounds (even
with both units
turned on)
1. Make sure that the power adaptor is
connected to the camera.
2. The battery on the parent unit may
need charging, be sure to charge it
using the adaptor included.
3. The parent unit may be out of range
of the camera; be sure to check if
the Range LED is on continuously.
Parent unit is
emitting a high
pitched noise/
feedback.
This sound is normal feedback which
occurs if the parent unit and camera
are too close together. Move them
further apart.
■
Low batteries will cause the supply current to
become unstable and will affect the quality of the
video/audio. Please charge the battery fully for use
for superior video performance.
Summary of Contents for Secure875
Page 19: ......