background image

67 of 72 

• 

The external call will be put on hold and internal dialling tone can 
be heard from the earpiece or speaker. 

• 

The 

 icon is displayed in addition to 

 and   icons. 

• 

Press the number of the handset you wish to call. 

• 

When the other handset answers the call, press 

 on the 

handset or place the handset on the cradle will transfer the call. 

The 

 and   icons will be turned off. 

 
Conference Call 
 
Conference call can be activated between external call, and two 
handsets. 
 

• 

During an external call, press

• 

The external call will be put on hold and internal dialling tone can 
be heard from the earpiece or speaker. 

• 

The 

 icon is displayed in addition to 

 and   icons. 

• 

Press the number of the handset you wish to call. 

• 

When the other handset answers the call, press and hold the 

 

will activate the conference call. The 

 icon on both handsets 

will be turned on. 

• 

You can exit the conference call by pressing 

 on the handset 

or place the handset on the cradle. The other handset and the 

external call will still be connected. The 

 and   icons will be 

turned off. 

 
 
Room Monitoring 
 
When more than one handset is registered to the same base unit, one 
of the handsets can be used as a room (baby) Monitor device. 
 
To activate: 

• 

Press

. Use 

 to scroll through the menu until the display 

reads FEATURES. 

68 of 72 

• 

Press

. Use 

 to scroll through until the display reads 

MONITOR. 

• 

Press

. Use 

 to select ON.  

• 

Press

• 

Press and hold 

 to exit to standby. 

 
MONITOR will flash on the display to indicate the handset is in 
monitor mode during standby.  User can make internal call to this 
handset from another handset, the microphone on this handset is 
activated (being in monitor mode) and noise from the room can be 

heard. User can also press 

 to hear from the speaker. There will 

be no internal ringing. 
 
To de-activate: 

• 

Press 

 will take you to the MONITOR menu directly. 

• 

Press

. The display reads ON. 

• 

Press 

 to select OFF. 

• 

Press 

 to confirm and exit to MONITOR. 

• 

Press and hold 

 to exit to standby. 

 
Note: The handset under monitor mode will not ring when an external 

call comes in. 

 
 
De-register a Handset 
 
One handset can de-register all other handsets registered to the 
same base unit. 
 

• 

Press

. Use 

 to scroll through the menu until the display 

reads SYSTEM. 

• 

Press

. Use 

 to scroll through until the display reads 

DELETE HS. 

Summary of Contents for DECT MI40





































Reviews: