background image

63 of 72 

Delete All Records 
 
You can reset the phonebook records, redial list, call log and network 
services numbers by using this menu. 
  

• 

Press

. Use 

 to scroll through the menu until the display 

reads RESET. 

• 

Press

. Use 

 to scroll until the display reads RECORDS. 

• 

Press

. The display will show RESET? 

• 

Press 

 to confirm and exit to RECORDS. 

• 

Press and hold 

 will exit to standby.  

 

Note: Once reset, all entries in the phonebook, redial list, call Log are 

deleted and the network Services numbers are reset to factory 
default. 

 
 

Using Additional Cordless Handsets 

 
Registration  
 
Each additional compatible handset must go through the registration 
process with the base.  Each Oricom handset can be registered with   
up to 4 base units. Each base can have up to 5 handsets registered 
to it.  
When registering, each handset can select base number for the base 
to be registered so that it can be identified at base selection setting. 
 
To register: 
 

• 

Press

Use 

 to scroll through the menu until the display 

reads SYSTEM. 

• 

Press

. Use 

 to scroll through the menu until the display 

reads REGISTER. 

• 

Press

. The display will read BS 1 2 3 4. 

64 of 72 

• 

Enter the number of the base unit you wish to register using the 
numeric key. 

• 

The handset will read PIN? 

• 

Enter the PIN number (default is 0000). 

• 

Press and hold the PAGE button 

 on the base unit until you 

hear 2 beeps. 

• 

Press 

 on the handset.  The handset will read SEARCH BS X 

while it searches for the base unit (where ‘X’ is the number of the 
base you are registering to). 

• 

Once a connection has been made, the handset name and 
number (the next available number if the number of handsets 
already registered with the base is less than 5) will be shown on 
the display. 

 
 
Base Selection 
 
AUTO 

If the base selection setting is set to auto, whenever the 
handset is lost link or powered up, it will search any 
available registered base to connect. 

 
Fixed 

One of the bases registered can be assigned as a fixed 
base so that it will be the only base to be searched when 
the handset is lost link or powered up. 

 
To set:  

• 

Press

Use 

 to scroll through the menu until the display 

reads SYSTEM. 

• 

Press

. Use 

 to scroll through the menu until the display 

reads SELECT BS. 

• 

To select AUTO, 

Press

. The display reads AUTO.  

Press 

 will confirm the selection. The handset will search 

any available registered base during registration. 

• 

To select Fixed base,  

Summary of Contents for DECT MI40





































Reviews: