![background image](http://html1.mh-extra.com/html/oricom/care620-series/care620-series_user-manual_1650605032.webp)
32
PHONE SETTINGS
Change the System PIN Code
The default system PIN code is 0000.
1. Press <MENU/OK> then <UP> or <DOWN> to select
BS SETTINGS
.
2. Press <MENU/OK> then <UP> or <DOWN> to select
CHANGE PIN
.
3. Press <MENU/OK>, you are then requested to enter the 4-digit
system PIN.
4. Enter the old system PIN.
5. Press <MENU/OK> and enter the new system PIN.
6. Press <MENU/OK> and enter the new system PIN again.
NZ Setting
1. Press <MENU/OK> then <UP> or <DOWN> to select
BS SETTINGS
.
2. Press <MENU/OK> then <UP> or <DOWN> to select
NZ
.
3. Press <MENU/OK> then <UP> or <DOWN> to select
ON
or
OFF
.
4.
Press <MENU/OK> to confirm.
Remark: when set to ON, the New Zealand area code management is
enabled.
Handset Settings
Set the Ringer Melody for Internal Calls or External Calls
1. Press <MENU/OK> then <UP> or <DOWN> to select
HS SETTINGS
.
2. Press <MENU/OK> then <UP> or <DOWN> to select
RING SETUP
.
3. Press <MENU/OK> then <UP> or <DOWN> to select
INT RING
or
EXT RING
4. Press <MENU/OK> then <UP> or <DOWN> to select the desired
ringer melody (a total of 10 melodies for your selection) for internal
calls.
5.
Press <MENU/OK> to confirm.
Set the Ringer Volume
1. Press <MENU/OK> then <UP> or <DOWN> to select
HS SETTINGS
.
2. Press <MENU/OK> then <UP> or <DOWN> to select
RING SETUP
.
3. Press <MENU/OK> then <UP> or <DOWN> to select
RING
VOLUME
.