![background image](http://html1.mh-extra.com/html/oricom/care620-series/care620-series_user-manual_1650605036.webp)
36
PHONE SETTINGS
1.
Press and hold <PAGE> on the base station for about five seconds,
the base station enters registration mode.
2. P r e s s < M E N U / O K > t h e n < U P > o r < D O W N > t o s e l e c t
REGISTRATION
.
3. Press <MENU/OK> and select the destination base you would like to
register to.
4. Press <MENU/OK>, you are requested to enter the 4-digit system
PIN.
5. Enter the 4-digit system PIN.
6.
Press <MENU/OK> to confirm.
If the handset registration is successful, you will hear a confirmation tone
and the <antenna icon> of the handset will stop flashing. The handset
will automatically be allocated the next available handset number.
Reset Your Phone
You can reset your phone to the default settings. After reset, all personal
settings and call list entries will be deleted, but your phonebook and Call
block list remain unchanged.
1. Press <MENU/OK> then <UP> or <DOWN> to select
DEFAULT
.
2. Press <MENU/OK> then you are requested to enter the 4-digit
system PIN.
3. Enter the 4-digit system PIN.
4.
Press <MENU/OK> to confirm.
5.
Press <MENU/OK> to re-confirm.
Power Fail Back up
Please Note: This will not work if connected to the NBN or via an ATA. It
will only work when connected to a battery backed system.
Let you make calls during a mains power interruption with your cordless
phone. This power fail back-up function should work within first 2 to 3
hours* of mains power interruption.
During a mains power interruption, you put your cordless handset onto
the base unit, so you can make calls even when the power is out.