Troubleshooting
Possible Reason
Approach
The motor does
not rotate
or stops during
inflation
Low battery
Charge the machine
The machine continues
to work for a long time,
the internal hest,
Start internal temperature
portection program
Naturally cool the machine for
about 15 minutes before use
Reduced suction
HEPA filter is covered with dust
The suction line is blocked
HEPA filter damp
Battery is low
Leakage in the inflation line
There are foreign objects
in the inflation pipe
Check for foreign objects in the joint pipe
Check if the adapter is plugged in properly
USB adapter:
replace the adapter iarger than 1A
The output current of the USB
adapter is insufficient
Charger damaged
Internal temperature too high
No power the
charger shows
agreen light
Charging indicator
does not light
or flashing
Check the port and recinnect
The wire is not in full contact
Please let the machine set and cool for 15 minutes.
After that it should begin charging
Please contact the after-sales treatment in time
Adapter is not plugged into place
Slow inflation
Check whether the joint is connected
correctly and the tire is lesking
Charge the machine
Sun/air-dry the HEPA filter or new HEPA
Clean up the dust attached to the vacuum pipe
Clean or replace the HEPA filter
7
