background image

Precautions:

1

.

Before using the air pump for the first time, please read the manual carefully. 

   Confirm all pieces are present and also check for any damage (switch, wires...)

2

.

Do not expose air pump to moisture, drops or sediment intrusion. The machine is not a toy 

   and children should not operate unless under close supervision of an adult.

3.Please read the instruction manual of this machine carefully, and use the original spare parts 

   of our company.

4.If the vacuum does not arrive with a filter, please contact us to obtain a filter prior to first use. 

   Operation without a filter will damage the product.

5.Using this machine to clean up liquid substances, combustibles, cooled ash or other 

   hazards may result in damage to the machine or even fire.

6.Any unauthorized disassembly of the machine will void the warranty and may cause injury or 

   product failure.

7.If the machine is damaged or partially damaged, do not use it.

8.This machine is not suitable for tire inflation of vehicles over 14000 lbs.

9.Do not operate near flammable liquids or gases, near sparks or open flame, 

   explosive objects or liquids...

10.When used for car inflation, the machine will heat up after about 10 minutes of continuous use. 

     It is recommended to cool down before using it for 15 minutes.

This will extend the life of the machine.

11.When inflating a tire with this machine, do not leave it unattended, paying attention 

     to pressure changes. Use caution to not over-inflate.

12.After using the air nozzle, return the lever to the straight position to avoid a lack of 

     internal rubber elasticity.

13.Always re-charge to full after using this machine.

14.Please allow the machine to cool for 15 minutes prior to charging.

6

Summary of Contents for YD-578











Reviews: