background image

Instructions for Use (when used as a vacuum cleaner)

Instructions for Use of Accessories

1.

Brush Tool

2.

Crevice Tool

3.(Hose)

When charging with AC adapter

Use USB port for charging

(At home or hotel)

At home or car or hotel

Product Charge

Provides 2 modes of charging:
It is in Charging Mode when the indicator light is red. 
It is fully charged when the indicator light changes to green.
Reference: AC: Adapter: about 4.5h, USB: Charging: about 8h
Attention: In order to prevent the machine from heating up and not gaining a full charge, 
Please allow the machine to cool for 15 minutes prior to charging.

1.Connect the charger and fully charge the battery
2.Connect the corresponding accessories according to the occasion of use 
(see the instructions for use of the accessories )
3. To operate vacuum, push "Power" switch forward.

1.Brush Tool

Combining the function of suction and wiping is suitable for 

cleaning various areas including cushions, fabric foot pads, air outlets, 
and other hard-to-reach areas.
2.Crevice Tool

Suitable for cleaning dust and small debris from doors, seats, and ashtrays.

3.Hose: Can flexibly match with all attachable accessories to clean up every corner.

3

Summary of Contents for YD-578











Reviews: