Disassembly & Cleaning
1. Use your finger to press the button in the direction of arrow 1,
and use the other hand to rotate the dust cup out ( Figure 1)
2. Take out the HEPA in the dust cup and install it in the direction of the arrow (Figure 2)
3. Discard the garbage in the dust cup. The garbage on the HEPA can be cleaned
with a brush (included).
If HEPA and the dust cup are dirty,please rinse with clean water.
The HEPA must be fully dried before using if washed.(Figure 3)
Figure 1
Figure 2
Figure 4
Assemble: Align the HEPA filter with the dust cup according to the shape,
and reinstall it in the direction of the arrow,After the HEPA is installed to the end,
put the entire dust box back into the body in the reverse direction of disassembly,
When you hear a "snap", it means the installation is complete. (Figure 4)
Figure 3
4
