5) Tire pressure adjustment
Please adjust tire pressure to 17.4 psi (0.12 Mpa)
If the air pressure of the left and right tires is not equal, there is
a danger of losing control of the handlebars.
6) Adjusting each wire
●
Check that you are taking sufficient safety precautions when adjusting each type of wire by
placing the machine on a flat, open surface with the engine switched off and the spark plug cord
removed.
■Drive clutch wire
Dirive clutch wire
・
If the drive belt slips when you depress the operater presence
lever down.
- Move the adjuster nuts toward B
・
If the machine moves when you release the operator presence
lever.
- Move the adjuster nuts toward A
■
Blade clutch wire
Blade clutch wire
・
If the blade belt slips when you engage the Blade clutch lever.
- Move the adjuster nuts towards B
・
If the blade does not stop when you disengage the Blade clutch
lever.
- Move the adjuster nuts towards A
■
Parking brake wire
Parking brake wire
・
If the unit moves when you release the operator presence lever.
- Move the adjuster nuts toward A
●
If there is no improvement even after performing the
adjustments above, it is possible that the brake pads are
worn out. Please inspect the brake pads.
●
For safety reasons, replace the parking brake before 100
hours of operation has elapsed.
Parking brake wire
(Next to Drive clutch wire )
Drive clutch wire
（
Next to operator presence
lever
）
WARNING
NOTICE
Blade clutch wire
B
A
B
A
B
A
27