1.
Refuel the fuel tank with unleaded gasoline.
(Please refer to the engine use manual)
■
How to start the engine
●
Do not start the engine in a confined space or a place with insufficient ventilation. Engine exhaust
gas is odorless and contains carbon monoxide which can cause death.
1.
Make sure that the operator presence lever is
released [OFF]. Shift the speed change lever to the [N]
position.
2.
Shift the fuel valve to the [ON] position.
3.
Shift the throttle lever to the choke [ ] position.
When the engine has finished warming up, shift to the
full throttle [ (HI)] position
4.
Grip the starter knob, pull slowly until you feel tension and
then pull strongly from this position.
Immediately after the engine has started, slowly return the
starter knob to its original position.
5.
Once the engine has started and run for 30 seconds, shift the
throttle lever from the choke [ ] position to the full throttle
[ (HI)] position.
●
Please warm up the engine by leaving it engaged, with the
throttle in [ (LOW)] for approximately 2 minutes.
DANGER
NOTICE
Speed change
lever
Throttle lever
17