●
DO NOT
get water in the HST unit, as water can cause permanent damage to the HST.
●
DO NOT
mix different types of oil. Doing so may damage the machine.
●
Engine oil and hydraulic oil are both pollutants to the environment. Dispose of used oil at a
certified recycling center or according to your state and local regulations.
●
This product is shipped from the factory pre-filled with ISO 46 hydraulic (HST) oil.
■
Lubrication of parts
●
Grease or lubricate these parts approximately every 30 hours.
There is a real danger of damage to the engine if you neglect to lubricate it.
Please lubricate the parts indicated in the pictures below.
2) Checking and adjusting the spark plug
1.
Remove the spark plug with a plug wrench and clean away any
carbon deposits on the electrodes with a wire brush and wipe
away any moisture if present.
2.
Replace the spark plug with a new one if the ceramic part has
cracked or the electrodes have suffered extensive wear and tear.
・
Spark plug to be used:
Plug ----BPR
５
ES (NGK)
3.
Please adjust the spark plug electrode clearance to 0.028-0.031in
(0.7-0.8mm).
●
When attaching a spark plug onto the engine, screw by hand before tightening with a plug
wrench. If you start by using a plug wrench to screw in the spark plug, there is a danger of
cross-threading it.
CAUTION
NOTICE
Ａ
Ａ
Ａ
Ａ
Ａ
Blade brake shaft
Tension shaft
Ａ
NOTICE
25