17
•
Turn up the output volume of music source to compensate.
•
Use the digital optical (TOSLINK) inputs if possible to reduce noise.
Digital optical issues: ‘Clicking’ or no sound
•
Connect the TV optical output to the soundbar optical input preferentially.
•
Ensure both ends of the optical cable have had the protective plastic tip
removed.
•
Ensure both ends of the cable have been inserted fully; a distinct ‘click’ will be
felt when the cable is properly seated.
•
Check the output format of the optical signal from the playing device. Choose
‘normal’ or ‘PCM’ format. Refer to the TV manufacturer’s handbook for more
information. You can also contact Orbitsound for advice, see contact help line in
this handbook and on the packaging.
No sound from subwoofer (soundbar working)
•
Check the subwoofer volume (back of subwoofer). Set to ‘normal’, then adjust to
preference.
•
Switch off and switch on the subwoofer to reset it.
•
Check power cables and power switches on soundbar and subwoofer.
•
Try a different wireless channel. Use a paperclip to short press the pair button
on the back of the soundbar. (See Channel selection)
•
If the subwoofer STATUS light is not lit, re-pair the subwoofer (see Pairing)
Battery replacement (remote)
Replace remote battery with anode up (+) from back-side.
BATTERY: CR 2025
Summary of Contents for M9 airSOUND
Page 2: ...2 ...