14
Setting memory
When in standby mode, or if disconnected from the mains completely, the soundbar
will remember settings for pairing, bass, treble, volume and source selection.
Note that the volume will be reduced if set very high when the unit restarts to protect the
listener.
Reset soundbar
Optical
Bluetooth
Aux
<HOLD>
You may wish to reset the soundbar settings. To do this, switch the unit on, then
press and hold the power button for a few seconds on the control panel. The
soundbar status light will flash, and then the soundbar will reset. Optical source will
be selected with default settings.
Auto-mute
If there is no signal, or extremely low input signal, the soundbar will enter auto-mute
mode. This reduces power consumption, and also completely silences the soundbar
and subwoofer.
Bluetooth resume / grab
If you have previously paired your phone/tablet, there is no need to re-pair the
device. Simply choose the Bluetooth source, then short press the Bluetooth button
on the control panel. The soundbar will seek a previously paired device, and resume
playback.
Summary of Contents for M9 airSOUND
Page 2: ...2 ...