Orbitsound M9 airSOUND, Handbook

Page: 7 / 23

5
Getting Started
Set up - Connect, power on, check subwoofer volume
POWER
ON
OFF
100V-240V~
SUBWOOFER VOLUME
WIRELESS
NORMAL
MAX MIN
PAIR
PAIRING PROCEDURE:
Before you start: Long press the PAIR button
on subwoofer(s) to reset. WARNING - this
will cancel previous pairing.
1. Long press the PAIR button on the
soundbar until the unit confirms pairing
mode with a fast flashing STATUS light.
2. Short press the PAIR button on
subwoofer(s).
3. Short press PAIR on the soundbar to finish
pairing procedure.
STATUS
Compact Wireless Subwoofer
©2012 orbitsound ltd. Model: S1
Approved components used
AC IN
STATUS
ON: Paired
(good signal)
Flashing: No
signal / un-paired
Off: Off / Standby
1
Connect power
2
Switch on power
2
1
1
1
1
1
2
3
Check subwoofer level
3
1. Connect the power supply and mains cord to the soundbar. The subwoofer
connects directly to the mains via a mains cord (all cables included).
2. Switch on the power on both the soundbar and subwoofer.
3. Check the volume setting on the subwoofer. Point this to normal. You can adjust
this later as preferred.
Hint: See advanced setup for more information on (3) subwoofer level. For the moment,
set it to ‘normal’