16
•
Turn down the volume of the soundbar unit
•
Turn up the output volume of music source to compensate.
•
Use the digital optical (TOSLINK) inputs if possible to reduce noise.
•
Connect the TV optical output to the soundbar optical input preferentially.
•
Ensure both ends of the optical cable have had the protective plastic tip
removed.
•
Ensure both ends of the cable have been inserted fully; a distinct ‘click’ will
be felt when the cable is properly seated.
•
Check the output format of the optical signal from the playing device.
Choose ‘normal’ or ‘PCM’ format. Refer to the TV manufacturer’s handbook
for more information. You can also contact Orbitsound for advice, see
contact help line in this handbook and on the packaging.
•
Check the subwoofer volume (back of subwoofer). Set to ‘normal’, then
adjust to preference.
•
Switch off, wait 1 minute, and switch on the subwoofer to reset it.
•
Check power cables and power switches on soundbar and subwoofer.
•
Try a different wireless channel. Use a paperclip to short press the pair
button on the back of the soundbar. (See Channel selection)
•
If the subwoofer STATUS light is not lit, re-pair the subwoofer (see Pairing)
Use battery type CR2032
