14
If there is no signal, or extremely low input signal, the soundbar will enter auto-
mute mode. This reduces power consumption, and also completely silences the
soundbar and subwoofer.
If you have previously paired your phone/tablet, there is no need to re-pair the
device. Simply choose the Bluetooth source, then short press the Bluetooth
button on the control panel. The soundbar will seek a previously paired device,
and resume playback.
Note: You can also press play/pause on the remote to Bluetooth grab a remote
device.
Use a soft, clean cloth moistened with plain, luke-warm water to clean the
exterior of the unit. Glass cleaner is a good way to remove finger marks, but
please use it sparingly, and avoid contact with the actual loudspeaker driver
units.
