4
The soundbar can be controlled from the control panel:
Optical
Bluetooth
Aux
1
2
3
4
5
6
7
1. Source:
Press to cycle through the inputs. This controls which
connected device is playing through the soundbar.
2. Bluetooth:
Short press to renew a Bluetooth connection / start playback.
Long press (Press and hold) to enter pairing mode.
3. Vol - :
Reduce soundbar volume.
4. :
Increase soundbar volume
5. Standby:
Enter standby mode / power on.
6. Source LED: Shows which source is currently playing
7. Status:
Blue shows the soundbar is on. Red shows standby.
The light will flash when a button is pressed on the remote
or on the control panel.
Hint: Long press the power button to reset the soundbar. This will reset the
source, volume, treble and bass memory to factory default settings. Press and
hold for 3 seconds. The soundbar will confirm by flashing the power/status light
3 times. The unit will reset and optical source will be selected.
