Operating instructions PS 4.5, PS 6.6
1 Notes on safety
orbitalum tools
gmbh
(12.06)
MT_PS 4.5, PS 6.6_BA_04_790048762_03.doc
3
1 Notes
on
safety
The Portable Tube Saw (in the following referred to as PS) is a state-of-the-art
machine. Using it for purposes other than those described in this manual may
cause injury to the user or to others. The machine or other equipment may also
be damaged.
Therefore:
•
Always ensure that the machine is in good working condition, and always
comply with these notes on safety.
•
Keep the complete documentation close by the machine.
•
Generally valid regulations for the prevention of accidents must be
observed.
1.1 Proper
use
•
Use the PS only for cutting tubes and elbows (see “Scope of application”,
chapter 3.2, p. 9).
•
The user will be the only person liable for damages caused by improper
use.
1.2 Safety
regulations
•
Only use the dimensions and materials specified in this manual. Always
consult Orbitalum Tools after-sales service personnel before using other
materials.
•
Read the enclosed safety notes completely and carefully before working
with the electric tool Metabo SBE 1010 Plus.
•
Only use original Orbitalum Tools spare parts and auxiliaries.
•
Inspect the PS every day for visible signs of damage or defects.
Any damage or defect must be repaired immediately.
•
Work on the electrical equipment may only be performed by a qualified
electrician.
•
Disconnect the PS from power supply before changing the tools or carrying
out maintenance and repair work and allow the machine to come to a stop.
•
Do not use the PS unless all safety devices (restart inhibitor, saw blade
guard) are working properly and the fixtures are fitted securely on the work
bench.
