7 Operation
Operating instructions PS 4.5, PS 6.6
26
(12.06)
MT_PS 4.5, PS 6.6_BA_04_790048762_03.doc
orbitalum tools
gmbh
7.6
Cutting the tube (saw position 1)
Danger of being injured by chips flying around
!
Never
work without the saw blade guard mounted.
!
Wear protective goggles.
Danger of being injured by sharp cutting edges
!
Keep hands away from the tools during cutting.
!
Never
equip both saw positions with saw blades at the same time.
!
Wear safety gloves.
Danger of death by electric shock
!
Disconnect the mains plug before mounting or dismounting or performing
maintenance or adjustment work and allow the machine to come to a stop.
Danger of being injured by falling tube piece
!
Do
not
let the cut-off tube piece drop in an uncontrolled way.
!
Secure the falling tube piece.
1. Fasten the saw blade (for saw position 1 see chapter 7.2, p. 18; for saw
position 2 see chapter 7.3, p. 21).
2. Adjust the tube dimension (see chapter 7.4, p. 23).
3. Mark the point of separation on the tube.
4. Move the tube forward in the vice until reaching the desired tube length and
clamp it (see chapter 7.4, p. 23).
Apply saw blade lubricant to the saw blade
after each cut
.
Only use Orbitalum Tools lubricating gel for tubes which come into contact with
drinking water or foodstuffs.
WARNING
IMPORTANT
