8 Clamping wedge and mandrel assembly BRB 2
Operating instructions BRB
38
(08.10)
MT_BRB_BA_04_790086762_00.doc
orbitalum tools
gmbh
8.4.5
Removing the mandrel:
BRB 2 "standard" with mandrel Ø 19.05
1. Remove the clamping wedges (see working steps 1 up to 3, chap. 8.2.2,
p. 31).
2. Use feed ratchet (2) to unscrew mandrel (1) out of the housing in the
direction of the arrow.
3. Remove tool mounting plate (4) (for later assembly of mandrel dia. 12.75
only).
8.4.6
Fitting the mandrel:
BRB 2 "standard" Ø 19.05
1. Fit the tool mounting plate (4).
2. Push mandrel (1) into the housing.
3. Use the feed ratchet (2) to rotate the mandrel (1) into the housing in the
opposite direction to the arrow until approx. 15 mm (0.591 inch) of thread
is visible.
4. Fit the required clamping wedges (see working steps 4 up to 8,
chap. 8.2.2, p. 31).
2
4
1
3
