Orbitalum BRB 2 Operating Instructions Manual Download Page 58

Page: 58 / 92

9 Clamping wedge and mandrel assembly BRB 4

Operating instructions BRB

(08.10)

MT_BRB_BA_04_790086762_00.doc

orbitalum tools

gmbh

9.4.1

Replacing the mandrel:
BRB 4 "standard" with mandrel Ø 19.05 and Ø 31.50

1. Remove clamping wedges (1) (see chap. 9.2.1, p. 48).

2. Remove clamping ratchet with clamping ratchet nut (2).

3. Pull threaded spindle with clamping disc (3) from mandrel (4) in the

direction of the arrow.

4. If the mandrel dia. is 19.05 mm, remove the tool mounting plate (5).

5. Unscrew the mandrel (4) out of the housing (7) with the feed ratchet (6).

6. Pull mandrel (4) out of the housing (7).

1. If the mandrel dia. is 31.5 mm, first fit the tool mounting plate (5).

2. Push mandrel (4) into housing (7). Watch out for the groove position!

3. Rotate the mandrel (4) into the housing (7) with the feed ratchet (6).

4. If the mandrel dia. is 19.05 mm, now fit the tool mounting plate (5).

5. Push the threaded spindle with clamping wedge (3) into the mandrel (4).

6. Fit the clamping ratchet with clamping ratchet nut (2).

7. Fit the required clamping wedges (1) (see chap. 9.2.1, p. 48).

Removal

Assembly

Summary of Contents for BRB 2





























































































Search results

Summary of Contents for BRB 2

Reviews:

Related manuals for BRB 2

Brands by name

Popular brands

Orbitalum BRB 2, Operating Instructions Manual

Search results

Summary of Contents for BRB 2

Reviews:

Related manuals for BRB 2

Brands by name

Popular brands