Orbitalum BRB 2 Operating Instructions Manual Download Page 12

Page: 12 / 92

1 Safety instructions

Operating instructions BRB

(08.10)

MT_BRB_BA_04_790086762_00.doc

orbitalum tools

gmbh

Electric shock from grounded elements!

Death.



Avoid

contact with grounded surfaces such as pipes, heaters, stoves or ice

boxes.

Machine noise levels > 80 dB (Laeq [dB(A)])!

Irreversible damage to hearing.



Wear ear protection that complies with DIN EN 352.

Parts can be ejected when working!

Irreversible eye injuries.



Wear safety goggles that comply with DIN EN 166.

Falling objects!

Feet can be irreversibly crushed.



Wear safety shoes that comply with DIN EN 20345-S3.

Sharp-edged chips whirling around!

Irreversible cuts.



Wear safety gloves that comply with EN 388 (protection level 5).

Loose clothing and long hair can get caught in the machine!



During operation,

not

wear loose clothing, e.g. neckties.



Secure long hair to prevent it being caught up.

Threat posed by incorrect usage!

Discomfort & tiredness.

Limited ability to react, and cramps.



Run through some relaxation exercises every 10 minutes.



Assume an upright and relaxed posture when working.

1.7 Machine

shutdown

For descriptions of the EMERGENCY STOP functions, see sections 10.3.1,
p. 67 and 10.3.2, p. 67.

DANGER

WARNING

Summary of Contents for BRB 2





























































































Search results

Summary of Contents for BRB 2

Reviews:

Related manuals for BRB 2

Brands by name

Popular brands

Orbitalum BRB 2, Operating Instructions Manual

Search results

Summary of Contents for BRB 2

Reviews:

Related manuals for BRB 2

Brands by name

Popular brands