32
equipment may result in injury to person and equipment and substantially void your warranty. Normal wear
and tear due to use, transport, exposure to air and radiation, material fatigue is not covered.
Maintenance tips
Motorised products, including treadmills, some exercise bikes and cross trainers may require scheduled
service for safety guarantee and smooth operation of your product. Please refer to ‘service card’ enclosed in
your user manual. For products that do not come with a service card, please refer to below general advice or
contact Orbit service department for more specific advices.
All Orbit products are designed and produced for indoor usage-do not place them outdoor or expose them to
weather.
Always inspect parts of safety concern prior to exercise, eg. Steel cable, handle bar, foot pedal, chains and
bands etc. Repair or replace any damaged or worn parts as early as possible so to avoid injury.
As part of Orbit’s normal installation and set-up process, all bolts must be tightened and checked after the first
1 to 2 hours of initial usage and then periodically. Loose bolts and nuts may come off, causing damage, which
may void warranty and can cause potential danger to the user as well.
After training, always wipe down your Orbit machine. Perspiration that continuously settles on the frame and
pads may cause rust or damage to the unit. Damage resulting from lack of proper maintenance will not be
covered under warranty. To clean upholstery and frame, use a mild soap and warm water. Dry with a clean
towel.
If any cracks appear in the frame, stop using your product immediately and contact Orbit Service department.
