Orbit OCEANTRX4-500, Installation And Operation Manual, Page: 81 / 197

Navigating the MTSVLink Main Screens
OceanTRx
TM
4-500 Installation and Operations Manual 6-9
6.2.3.1 Operation Screen Menu Bar Options
NOTE: Below are the options displayed by default; the Maint, Logger, Step and Spectrum menu
options invokes different menus.
Main Menu Bar General Description
Esc - Exit Go back to the previous screen or quits the application (from
the last screen).
Satellites Shows available satellite constellation and orbit options and
provides detailed configuration parameters (section
‎
7.3).
Mode Antenna mode control options (Acquire, Search, etc.). Most of
these options are parallel to the Side Bar shortcut buttons
(section
‎
6.2.3.2).
Config Provides setup (commissioning) options (Chapter
‎
7).
Commands Basic system commands menu
Maint Invokes a Maintenance Screen.
Logger Invokes a Graphic Data Logger tool (section
‎
9.2)
Step Invokes a Step Track Screen – shows antenna system location
during Step-track mode.
Spectrum Invokes the Spectrum Analyzer tool (section
‎
9.1).
Version MTSVLink Release Version window.
Host Communication properties menu.
6.2.3.2 Side Bar (Operation Modes) Menu Options
NOTE: In Operating Screen, side bar buttons appear constantly regardless the screen you operate.
Side Bar
Buttons Description
F9 Shutdown System shutdown.
Acquire Points the antenna at the satellite last selected from the database,
and activates Step-Track Mode.
Acquire Sat
Preset Points the antenna to a user-defined geo-stationary longitude and
activates Step-Track Mode.
Step-Track Under normal working conditions, Step-Track Mode is activated
automatically from the Acquire and Acquire Satellite Preset Modes.
However, it can be activated manually for maintenance and
integration purposes.
Peak Points the antenna at the position of maximum AGC, as determined
by the last step-track iteration.
Pnt-to-Sat Points the Antenna at the satellite last selected from the Satellite