Mounting ADE
Unpacking and Mounting
4-4
Ocean TRx™ 4500 Installation and Operations Manual
Step 5.
Unpacking the BDE
elements and accessories:
a.
Cut the shrink nylon and set
aside the BDE elements and
all accessories.
b.
Verify all items are present,
according to the packing list.
c.
Visually inspect all items.
Report any damaged parts to
the shippers and to
as units damaged during
shipping are not covered by
the warranty terms and
conditions.
4.2
Mounting ADE
ATTENTION!!
The ADE should be positioned with the
bow marker
aligned
(as closely as possible) to the ship’s centerline. Small variations from actual
alignment can be compensated during the Setup procedure (section
7.4).
The mounting procedure consists of the following:
(Using the crane and harness), partially lifting the ADE along with the attached
wooden platform
Removing the wooden platform and supports
Mounting onto the support structure.
4.2.1
Securing and Lifting Antenna System
Step 1
Attach the lifting harness to the crane and lower it
over the Radome.
Shrink
Accessories
