Push Buttons
These push buttons on the timer are used for programming and
other operations:
A
Home / Lock
Used to exit settings; to go into AUTO MODE, or to lock the
touch screen.
b
System Off
A single push will open the Rain Delay screen.
A second push of the button will place the entire system in
OFF mode.
c
Reset (pin hole)
Resets the timer to its factory settings.
d
RF Sync (only on remote control model)
Allows the timer to synchronize with a new remote or wire
less sensor.
e
Rain Sensor
In Active position the controller will monitor the rain sensor,
in Bypass position the controller will ignore the rain sensor.
(This switch is for hard wired sensors only and does not
effect wireless rain sensors).
Section 2:
Getting Started
Set Language
•
Press the
RESET
button. The controller will now take you
through a step by step programming process.
•
Press
or
on the touch screen to set the language of your
choice (English, Spanish, French, German or Italian).
•
Press
ENTER
.
Set Current Time and Date
•
Press
or
to set the current time. Press
ENTER
.
•
Press
or
to set the current year. Press
ENTER
.
•
Press
or
to set the current month. Press
ENTER
.
•
Press
or
to set the current day of the month.
Press
ENTER
.
Determine a Watering Plan
See page 14 for instructions.
SYSTEM
OFF
RAIN SENSOR
ACTIVE | BYPASS
RF SYNC
RESET
Stylus
Figure 1:
Front view of touch-screen timer
07WTM004225 57932-24 rE.indd 4
5/2/07 4:39:23 PM
