Orbit Fitness OHG3067, Assembly Instructions Manual

Page: 9 / 26

8
ASSEMBLY INSTRUCTIONS
STEP 6:
1. Attach Leg Extension Frame (7) to Seat Cushion Frame (6), using one M12×75mm Hex
Bolts (61), two M12 Washers (73) and one M12 Nylon Nuts (79).
2. Insert two Foam Tubes (14) into Seat Cushion Frame (6) and Leg Extension Frame (7).
3. Slide four Leg Foam Rollers (23) onto two Foam Tubes (14).
4. Attach two Single Pulley Brackets (18) to Main Upright Frame (5), using two M8×65mm Hex
Bolts (67), four M8 Washers (76) and two M8 Nylon Nuts (81).
5. Attach Low Pull Seat (19) down Base Frame (1), using one M8×15mm Hex Bolt (69) and
one M8 Big Washer (78).
6. Attach Backrest Cushion (21) to Main Upright Frame (5), using six M8×15mm Hex Bolts (69)
and six M8 Washers (76).
7. Attach Seat Cushion (22) to Seat Cushion Frame (6) using four M8×15mm Hex Bolts (69)
and four M8 Washers (76).