Orbit Fitness OHG3067, Assembly Instructions Manual

Page: 12 / 26

11
ASSEMBLY INSTRUCTIONS
STEP 7: Start with the Upper Cable (39)
a.) With Upper Cable (39) in groove of Pulley (36) through the Top Cross Frame (3).
b.) Install Pulley NO.1 (36) to the Top Cross Frame (3) using one M10X45mm Hex Bolt (64),
two M10 Washers (74) and one M10 Nylon Nut (80).
c.) Install Pulley NO.2 (36) to the Top Cross Frame (3) using one M10X45mm Hex Bolt (64),
two M10 Washers (74) and one M10 Nylon Nut (80).
d.) Install Pulley NO.3 (36) to two Pulley Patches (16) using one M10X45mm Hex Bolt (64),
two M10 Washers (74) and one M10 Nylon Nut (80).
e.) Install Pulley NO.4 (36) to the Top Cross Frame (3), using one M10X45mm Hex Bolt (64),
two M10 Washers (74) and one M10 Nylon Nut (80).
h.) Attach the bolt end of the Upper Cable (39) to the Selector Shaft (15) with Plastic Washer
(29).