Orbit Fitness OHG3067, Assembly Instructions Manual

Page: 16 / 26

15
ASSEMBLY INSTRUCTIONS
STEP 9: Assembly the Lower Cable (41)
a.) Install Pulley NO.8 (36) to the Low Pull Seat (19), using one M10X45mm Hex Bolt (64), two
M10 Washers (74) and one M10 Nylon Nut (80).
b.) Install Pulley NO.9 (36) to two Pulley Patches (16), using one M10X45mm Hex Bolt (64),
two M10 Washers (74) and one M10 Nylon Nut (80).
c.) Install Pulley NO.10 (36) to the Base Frame (1), using one M10X45mm Hex Bolt (64), two
M10 Washers (74) and one M10 Nylon Nut (80).
d.) Install Pulley NO.11 (36) to the Reverse U (17), using one M10X45mm Hex Bolt (64), two
M10 Washers (74) and one M10 Nylon Nut (80).
e.) Install Pulley NO.12 (36) to the Base Frame (1), using one M10X45mm Hex Bolt (64), two
M10 Washers (74) and one M10 Nylon Nut (80).
f.) Install Pulley NO.13 (36) to the Base Frame (1), using one M10X45mm Hex Bolt (64), two
M10 Washers (74) and one M10 Nylon Nut (80).
g.) Attach the end of Lower Cable (41) to the Leg Extension Frame (7) using one Pothook (38).