Orbit Fitness OHG3067, Assembly Instructions Manual

Page: 8 / 26

7
ASSEMBLY INSTRUCTIONS
STEP 5:
1. Attach Butterfly Extension (4) to Top Cross Frame (3), using two Oil Bushing (small) (43),
one M12×155mm Hex Bolt (60), two M12 Washers (73) and one M12 Nylon Nut (79).
2. Attach Tobacco-pipe (34) to Main Upright Frame (5) using one M8×40mm Hex Bolt (68), two
M8 Washers (76) and one M8 Nylon Nut (81).
3. Slide
∅
30X
∅
10 Washer (72) and Plum Blossom Nut (35) onto Tobacco-pipe (34).
4. Attach Left Butterfly Arm(9) to Butterfly Extension (4) using two Oil Bushings (big) (42), one
M12 Washer (73), one M12 Nylon Nut (79) and one Plastic Dome Cap (47).
5. Insert L-Pin (31) into Butterfly Extension (4) and Left Butterfly Arm (9).
6. Slide Arm Foam Roller (24) onto Left Butterfly Arm (9).
7. Insert Hand Tube (10) into Left Butterfly Arm (9) using four M8×15mm Bolts (70) and four
M8 Arc Washers (77).
8. Assembly Right Butterfly Arm (8) with same method.