CTP 1930
10
CHARGE
Charge your clipper for 16 hours before first use. Make sure the device is switched off while charging the
battery. You can charge the clipper by connecting it directly to the charging adapter.
Turn off the device to charge it.
It takes 8 to 12 hours for a full charge.
Once fully charged it can be operational for 30 minutes.
ACCESSORIES
The accessories included are: a hair clipper, an adaptable head for ears and nose, a shaver, a adjustable
guide comb, a comb, scissors, a brush and lubricating oil.
ALWAYS TURN OFF THE DEVICE BEFORE ADJUSTING OR CHANGING THE HEAD.
HOW TO USE THE HAIR CLIPPER
1.
Choose a head that corresponds to your needs.
2.
Attach the head to the upper part of the razor body: for this, match the bottom of the head with the hole
in the accessory holder of the razor, press until you hear a click (see sequence below):
3.
To remove the head, push the top of the head outward until it pops out.
4.
Slide the ON/OFF switch to the top to operate the clipper.
5.
To attach the comb to the beard trimmer attachment, place it on top of the blade and slide it down. This
comb can be moved up and down to select the different measurements.
Remove the head
Insert with A
alignment with
B
Press it downward till
you hear the click
Fix the head
