CTP 1930
12
CLEANING FOIL SHAVER
(DO NOT rinse oil over the foil shaver attachment as this is permanently lubricated.)
1.
Remove attachment by pressing security latches on sides of shaver.
2.
Remove head, shake to remove excess clippings.
3.
Replace attachment by gently snapping into place.
OILING BLADES & CAUTIONS (Oil provided)
Rinsing attachments under water requires lubricating the cutting blades 1× monthly. Using only mineral
oils (e.g. sewing machine oil), simply spread 1-2 drops lightly over cutters with fingertip. Wipe away all
excess.
Use only mineral oils as these will not evaporate nor slow down speed of cutting blades.
Note: ensure the hair clipper is off while you clean it.
Disposal of old electrical appliances
The European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE), requires
that old household electrical appliances must not be disposed of in the normal unsorted municipal
waste stream. Old appliances must be collected separately in order to optimize the recovery and
recycling of the materials they contain, and reduce the impact on human health and the environment.
The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose
of the appliance, it must be separately collected.
Consumers should contact their local authority or retailer for information concerning the correct disposal of
their old appliance
DECLARATION OF CONFORMITY:
This device complies with the requirements of the Low Voltage Directive 2014/35/EU and the
requirements of the EMC directive 2014/30/EU.
