Orban OPTIMOD-FM 5700i, Operating Manual

Page: 94 / 335

2-38
INSTALLATION ORBAN MODEL
c) Use the Prev and Next buttons to move the cursor set the hour, minute, and
second (in 24-hour format) when the automation event is to occur. Set the
desired values with the knob.
D) For events that occur on a daily or weekly schedule:
a) Use the Prev and Next buttons to move the cursor the each day of the week
in turn, and use the rotary encoder to turn the day on or off.
You can program the event to occur on as many days of the week as you
wish.
b) Use the Prev and Next buttons to move the cursor set the hour, minute, and
second (in 24-hour format — e.g., 18:00:00 for 6:00 PM) when the
automation event is to occur. Set the desired values with the knob.
Automation events have a “start” time but no “stop” time. The 5700i will
indefinitely remain in the state specified by an existing automation event
until its state is changed by another automation event or by another ac-
tion (such as a user’s interacting with the front panel or PC Remote soft-
ware).
E) For all events:
a) Press the S
ELECT
E
VENT
button.
b) Turn the knob to set the desired event. The available events are:
•
Recall factory preset
•
Recall user preset
•
stereo mode
•
mono-from-left-channel (
MONO-L
) mode
•
mono-from right-channel ( MONO-R ) mode
•
mono-from-sum-of-channels ( MONO-SUM )
•
bypass mode
•
Independently activate and defeat the diversity delay applied to the ana-
log, digital, and composite outputs.
•
exit test (restores the operating preset that was on-air before a test mode
was invoked)
•
mod. reduction 1
•
mod. reduction 2
•
exit mod. reduction
F) When you have programmed an event to your satisfaction, press the S
AVE
E
VENT
button.
You will return to the automation menu.