Orban opticodec 7200, Handbook

Page: 39 / 90

OPTICODEC E 39
OPTICODEC PC Remote
System Setup
This function is for the automatic recognition of units using a
control software such as NETControl and can only be used
in a local area network. For the control of units outside of
the network area, this function should remain disabled.
This point determines the call accept mode of the OPTICO-
DEC. You can set the accept mode more or less specific
for the unit and transmission permanently.
Then the OPTICODEC only accepts calls in the respec-
tive configuration. Or you can select the operation mode
AUTO(matic Codec Detection). The OPTICODEC serves as
a ‘SLAVE’ and takes over the parameters of the calling unit
automatically. The ‘AUTO’ mode is not available for ‘Audio
Input’ and ‘Userdata’. Descriptions starting page 26.
Statements about the audio compatibility (via ISDN) with
external codecs can be found on the supplied data carrier
or on the Internet at: www.orban-europe.eu.
Autodetect
Accept Configuration