Orban opticodec 7200, Handbook

Page: 8 / 90

8 E OPTICODEC
The OPTICODEC units hereafter complies to the following
regulations and standards:
EN 60950/VDE 0805/IEC 950: Protection Class 1.
VBG4, Part 5 paragraph 4: Regulations for the prevention
of accidents “Electrical Systems and Materials”.
EC directives: EMV 89/336/EWG and “low voltage regu-
lation” 73/23/EWG.
FCC Rules, Part 68 Subpart D:
FCC/Part 68 registration number US: OBDYNAN42059.
Industry Canada registration number IC: 4265A-001.
EMC directives:
DIN EN 55103-1 (June 97) - interference radiation, ambiance
E1 and DIN EN 55103-2 (June 97) - resistance to jamming,
ambiance E5, intensity degree 4 (ITU/R recommendation
500-4).
EN 50419:2005 Marking of Electrical and Electronic Equip-
ment accordance with Directive 2002/96/EC (WEEE).
For recycling the OPTICODEC please refer to your re-
sponsible OPTICODEC distributor.
According to the requirements of the EMC directive, the
regulations for electromagnetic compatibility, it is necessary
that the following measures are observed when using/ma-
nufacturing the connection cables:
For all connections shielded cables should be used
(with respect to the audio cables the well-known EMT
211 has proven its worth).
The shields should be soldered to the GND connections
and additionally to the connector shell directly.
For 3-pole audio sockets/plugs (type XLR) the respective
counter sockets/plugs manufactured by NEUTRIK should
be used.
Pin 4 (housing) is to be connected to pin 1 ground.
OPTICODEC 7200 and 7400
Certification / Labelling
Note on
EMC Measures