20
EN
Gramophone - Playing Classic Discs (PHONO)
This device has a full-featured three-speed belt driven turntable. This allows you to play the tracks
or record tracks from them.
You can play discs at 33, 45, and 78 rpm.
1
Press POWER to turn on the unit.
2
Press PHONO to turn on the gramophone (select turntable input source).
3
Make sure you remove the needle cover from the pick up and release the pick up arm latch
clip by gently sliding it to the right that secures the pick up arm on the pick up arm support.
4
Set the gramophone speed switch to the appropriate speed - 33, 45, or 78 rpm.
To play a SP plate (called a single with a large center hole) at a speed of 45 rpm, attach a
gramophone adapter to the center thorn of the gramophone adapter for 45 rpm.
5
Attach the disc to the center mandrel.
6
Using the arm lift control, lift the pick-up arm out of the armrest and gently slide the pick up
arm to the outer edge of the plate by hand so that the needle is above the groove in the plate.
The gramophone disc turns on automatically and starts to turn.
7
Slowly lower the arm lift knob slowly lower the pick-up arm to the disc surface.
8 Set the VOLUME knob to the desired level.
9 When the pick up arm reaches the edge of the disc, the disc rotation stops automatically.
Raise the pick arm with the control knob and slide it by hand over the arm holder and lower the
arm to the holder with the knob.
10 Press the POWER button to turn off the unit.
Note:
To stop playback manually, lift the arm of the pickup arm from the surface of the deck with the arm
lift knob, and gently slide the pickup arm into the arm holder.
pick up arm control
pick up arm
pick up arm
pick up arm control
