15
EN
Activate the remote-control battery
The system can be operated with the supplied remote control. The battery is already inserted,
activate it by pulling out the insulating foil. If the battery runs out, replace it with a new one of the
same type.
Open the battery holder on the back of the DO.
Insert the same battery (lithium CR 2025) into the holder. When inserting, observe the correct
polarity. Close the battery holder.
When using the remote control, point it at the remote-control sensor on the system.
Notes
• Do not leave the remote control in very hot or humid places.
• Do not use other types of batteries.
• Be careful not to get any object into the remote control, especially when replacing the battery.
• Do not place the device in such a way that the remote sensor is exposed to direct sunlight or
light from the lamps. Otherwise, malfunctions may occur with remote control.
• If you do not intend to use the remote control for an extended period of time, remove the battery
to prevent battery leakage and corrosion.
Zapojenia
