Oracle ZS4-4, Installation Manual

Page: 209 / 212

Performing Initial Configuration (CLI)
Note -
You can configure remote support now, or at another time. If you do not have an Oracle
support account, enter
done
without configuring remote support and complete it later. For more
information about configuring remote support later or obtaining an Oracle support account, see
“Phone Home Configuration” in Oracle ZFS Storage Appliance Administration Guide, Release
OS8.6.x .
Remote Support. Register your appliance and configure remote monitoring.
Subcommands that are valid in this context:
tags => Configure service tags
scrk => Configure phone home
help [topic] => Get context-sensitive help. If [topic] is specified,
it must be one of "builtins", "commands", "general",
"help" or "script".
show => Show information pertinent to the current context
abort => Abort this task (potentially resulting in a
misconfigured system)
done => Finish operating on "support"
hostname:maintenance system setup support> done
aksh: initial configuration complete!
Next Steps
■
If you did not configure the management interface yet, see the tasks in “Configuring
Management Interfaces” in Oracle ZFS Storage Appliance Administration Guide, Release
OS8.6.x .
■
See “Upgrading the Software” in Oracle ZFS Storage Appliance Customer Service Manual .
Related Topics
■
For an overview of network interface configuration, see “Working with Network
Configuration” in Oracle ZFS Storage Appliance Administration Guide, Release OS8.6.x .
■
For further configuration, see “Configuring the Appliance” in Oracle ZFS Storage
Appliance Administration Guide, Release OS8.6.x .
■
To change the root password, see “Changing a User Password (CLI)” in Oracle ZFS
Storage Appliance Administration Guide, Release OS8.6.x .
Configuring the Appliance for the First Time 209