Oracle ZS4-4, Installation Manual

Page: 201 / 212

Performing Initial Configuration (CLI)
■
If you did not configure the management interface yet, see the tasks in “Configuring
Management Interfaces” in Oracle ZFS Storage Appliance Administration Guide, Release
OS8.6.x .
Related Topics
■
For an overview of network interface configuration, see “Working with Network
Configuration” in Oracle ZFS Storage Appliance Administration Guide, Release OS8.6.x .
■
For further configuration, see “Configuring the Appliance” in Oracle ZFS Storage
Appliance Administration Guide, Release OS8.6.x
■
For more information about cluster configuration, see “Appliance Cluster Configuration” in
Oracle ZFS Storage Appliance Administration Guide, Release OS8.6.x
■
To change the root password, see “Changing a User Password (BUI)” in Oracle ZFS
Storage Appliance Administration Guide, Release OS8.6.x
Performing Initial Configuration (CLI)
Use this procedure, which is a step-by-step utility, to complete initial configuration of network
interfaces, the Domain Name Service (DNS), time settings, name services, directory services,
storage, and remote support on the appliance using the command line interface (CLI).
Note -
If installing clustered controllers, it is strongly recommended that you use the BUI for
initial configuration, as described in “Performing Initial Configuration (BUI)” on page 187 .
Each step begins by printing its help, which can be reprinted by typing
help
. Use the
done
command to complete each step. In the examples, the existing settings (obtained from the
DHCP server) are checked and accepted by typing
done
. To customize them, enter each context
(
datalinks
,
devices
and
interfaces
) and type
help
to see available actions for that context.
Before You Begin
■
Ensure you have configured the system as described in “Configuring the
System” on page 184 .
■
This procedure assumes you have just completed configuration of the network interface and
are using the same administrative client to access the CLI.
1. Log in using the administrative password that you created during system
configuration.
hostname console login: root
Password:
To setup your system, you will be taken through a series of steps; as the setup
process advances to each step, the help message for that step will be
displayed.
Configuring the Appliance for the First Time 201