Oracle ZS4-4, Installation Manual

Page: 206 / 212

Performing Initial Configuration (CLI)
For detailed information, see “NTP Configuration” in Oracle ZFS Storage Appliance
Administration Guide, Release OS8.6.x .
Configure Time. Configure the Network Time Protocol.
Subcommands that are valid in this context:
help [topic] => Get context-sensitive help. If [topic] is specified,
it must be one of "builtins", "commands", "general",
"help", "script" or "properties".
show => Show information pertinent to the current context
commit => Commit current state, including any changes
abort => Abort this task (potentially resulting in a
misconfigured system)
done => Finish operating on "ntp"
enable => Enable the ntp service
disable => Disable the ntp service
get [prop] => Get value for property [prop]. ("help properties"
for valid properties.) If [prop] is not specified,
returns values for all properties.
set [prop] => Set property [prop] to [value]. ("help properties"
for valid properties.) For properties taking list
values, [value] should be a comma-separated list of
values.
hostname:maintenance system setup ntp> set servers=0.pool.ntp.org
servers = 0.pool.ntp.org (uncommitted)
hostname:maintenance system setup ntp>
commit
hostname:maintenance system setup ntp> done
aksh: done with "ntp", advancing configuration to "directory" ...
5. Configure name services.
For detailed information, see “Configuring Services” in Oracle ZFS Storage Appliance
Administration Guide, Release OS8.6.x .
206 Oracle ZFS Storage Appliance Installation Guide • December 2016