E1000 with Fail-to-Wire Expansion Card:
Port 9 Port 10 Port 11 Port 12
Port 9
Port 10
Oracle Talari E1000 | Hardware Guide
E1000 with 10G Fiber Expansion Card:
Port 9:
10 Gigabit Ethernet (non-bypass)
Port 10:
10 Gigabit Ethernet (non-bypass)
Note:
Ports 9 and 10 should only be configured with Bypass Mode set as Fail-to-Block
on an E1000 with 10G Fiber expansion card. The 10G Fiber expansion card does not
support Fail-to-Wire, and the Talari service will not start if a configuration specifying
Fail-to-Wire for these ports is applied to an E1000 with 10G expansion card.
Port 9:
Gigabit Ethernet (Bypass pair with Port 10)
Port 10:
Gigabit Ethernet (Bypass pair with Port 9)
Port 11:
Gigabit Ethernet (Bypass pair with Port 12)
Port 12:
Gigabit Ethernet (Bypass pair with Port 11)
Note:
Ports 9 and 10 may be configured in either Bypass Mode on an E1000 with Fail-
to-Wire expansion card, as may ports 11 and 12.
2 4
