Oracle Talari E1000 | Hardware Guide
Site Deployment Criteria:
NCN
:
Easy 1
st
Install can be used once the Network Control Node (NCN) has been set
up for your network. If the E1000 being deployed is intended to become the
NCN, please see the instructions for manual installation.
Active Appliance Package: The NCN must be running an active configuration
which includes the E1000 for the site being installed.
Client Site Connectivity
:
Internet, DHCP, and DNS connectivity to the management interface are
required to use Easy 1
st
Install. If one or more are not available, please see the
instructions for manual installation.
Cable the LAN and WAN ports in accordance with the Talari configuration for
the site.
Use NCN to Upload Client Package to Registration Server:
13. Log in to the Web Console of the NCN.
14. Navigate to
Manage Network > Appliance Installation.
15. Locate the Site name of the E1000 being deployed.
16. Click the Edit pencil
to open the Set Serial Number window.
17. Enter the serial number of the E1000 being deployed and click the Set Serial
Number button. (Refer to Page 5 for assistance locating the serial number.)
18. Observe the
Upload/Activate
column. Click the
Upload/Activate
text when it
appears.
19. Continue to observe the
Upload/Activate
column. Once the text reads
Upload Complete
, proceed to the next section.
Deploy the Talari Appliance:
20. Ensure that the appliance management interface is cabled for
Internet connectivity.
21. Connect the power cord to the E1000. Connect the other end to an
appropriately grounded power source. The E1000 will power on automatically.
22. The E1000 will begin the Easy 1
st
Install process. Please allow up to ten minutes
for the process to complete. (From the NCN Web Console, observe the
Manage
Network > Appliance Installation
page for status updates during installation.)
23. Once the Easy 1
st
Install process has completed, the Talari service
will automatically be enabled.
2 2
