Fi
4
Slflki A Lk
Ft Ot Ril
Oracle Talari E1000 | Hardware Guide
Installation
3. Mount the assembled outer rails to the rack by using the self-locking arm locks
on each end (highlighted below). Make sure the “Front” arrow is pointing
towards the front of the rack and the “Back” arrow is pointing to the back of the
rack. The rails will click into place.
Figure 3: Self-Locking Arm on Back Outer Rail
4. Carefully slide the E1000 onto the installed rails on the rack and push the
device along the rails until you hear a click from the Side Rail Locks on both
sides. Some slight resistance when sliding the appliance into the rack is
expected and intended.
Removal
5. To remove the chassis pull the device forward out of the rack until the Side Rail
Locks are visible.
6. Depress the Side Rail Locks (highlighted below) to allow the device to
be unlocked from the rails.
Figure 5: Side View of E1000 Showing Side Rail Locks
7. Remove chassis from rails.
8. Once chassis has been removed, rails can be unlocked from the rack by
depressing the self-locking arm locks on each end of the outer rails (see
Figures 3 and 4).
1 6
